RE4-GP WD2002FYPS Hard Drive With improved performance, lower power consumption and higher capacity, this new generation of WD RE-GP drives provides even lower cost-of-ownership to organizations with large data centers. Improvements in our power-conserving technologies Intelli Seek, Intelli Park, and Intelli Power deliver improved power consumption over our previous generation of WD RE-GP drive.

Main Specifications

Product Description	WD RE4-GP WD2002FYPS - hard drive - 2 TB - SATA-300
Type	Hard drive - internal
Form Factor	3.5" x 1/3H
Dimensions (WxDxH)	4 in x 5.8 in x 1 in
Weight	1.6 lbs
Capacity	2 TB
Interface Type	Serial ATA-300
Data Transfer Rate	300 MBps
Buffer Size	64 MB
Vista Certification	Works with Windows Vista
Manufacturer Warranty	5 years warranty

General
Device Type	Hard drive - internal
Width	4 in
Depth	5.8 in
Height	1 in
Weight	1.6 lbs
Hard Drive
Form Factor	3.5" x 1/3H
Capacity	2 TB
Interface Type	Serial ATA-300
Buffer Size	64 MB
Features	Native Command Queuing (NCQ), Rotary Acceleration Feed Forward (RAFF), Time-Limited Error Recovery (TLER), IntelliSeek, StableTrac, IntelliPark, Perpendicular Magnetic Recording (PMR), IntelliPower
Compliant Standards	S.M.A.R.T.
Performance
Drive Transfer Rate	300 MBps (external)
Internal Data Rate	110 MBps
Reliability
MTBF	1,200,000 hour(s)
Non-Recoverable Errors	1 per 10^15
Start / Stop Cycles	600,000
Expansion / Connectivity
Interfaces	1 x Serial ATA-300 - 7 pin Serial ATA
Compatible Bays	1 x internal - 3.5" x 1/3H
Miscellaneous
Works with Windows Vista	Software and devices that carry the Works with Windows Vista logo have been tested for baseline compatibility with PC's running.
Compliant Standards	RoHS
Manufacturer Warranty
Service & Support	5 years warranty
Service & Support Details	Limited warranty - 5 years
Environmental Parameters
Min Operating Temperature	41 °F
Max Operating Temperature	131 °F
Shock Tolerance	65 g @ 2ms (operating) / 300 g @ 2ms (non-operating)
Vibration Tolerance	0.75 g @ 20-300 Hz (operating) / 4 g @ 20-500 Hz (non-operating)

Western Digital 2TB hard drives now available
	Model    Capacity    Interface    Form Factor    MTBF	WD2002FYPS    2TB    SATA    3.5 inch    1.2 mil. hrs.

With improved performance, lower power consumption and higher capacity, the new generation of WD2002FYPS drives provides even lower cost-of-ownership.

Configure a Custom System with 2TB WD »

WD 2TB DRIVE KEY FEATURES: 24x7 reliability – With 1.2 million hours MTBF, these drives have the highest available reliability rating on a high-capacity drive. IntelliPower – A fine-tuned balance of spin speed, transfer rate, and caching algorithms designed to deliver both significant power savings and solid performance. IntelliSeek – Calculates optimum seek speeds to lower unnecessary power consumption, noise, and vibration. IntelliPark – Delivers lower power consumption by automatically unloading recording heads during idle to reduce aerodynamic drag, and by disengaging read/write channel electronics. Active Power Management – WD drives with GreenPower™ technology monitor work load and automatically invoke idle mode whenever possible to further reduce unnecessary power consumption. Drive recovery time from idle mode is less than one second, providing seamless power management between the drive and the host controller. StableTrac™ – Secures the motor shaft at both ends to reduce system-induced vibration and stabilize platters for accurate tracking, during read and write operations. RAID-specific time-limited error recovery (TLER) – Pioneered by WD, this feature prevents drive fallout caused by the extended hard drive error-recovery processes common to desktop drives. Rotary Acceleration Feed Forward (RAFF™) – Optimizes operation and performance when the drives are used in vibration-prone multi-drive systems such as rack mounted servers.